Filter
Top Products
NETGEAR genie ADVANCED Home
44
D6200 WiFi DSL Modem Router
2. Click Next.
Enter the requested information:
• Connection name. Enter an appropriate name for the connection.
This name is not
supplied to the remote VPN endpoint. Rather, it is used to help you manage the VPN
settings.
• Pre-shared key.
The key has to be entered both here and on the remote VPN
gateway or the remote VPN client. This method does not require using a CA
(certificate authority).
• VPN tunnel connection.
The wizard has to know if you are planning to connect to a
remote gateway or setting up the connection for a remote client or computer to
establish a secure connection to this device.
3. Click Next.
Enter the remote IP address of the gateway you want to connect to, or provide the
Internet name of the gateway. The Internet name is the fully qualified domain name, as
set up in a Dynamic DNS service.
4. Click Next.
Enter the remote LAN IP address and subnet mask of the remote gateway.
• If this information does not match the LAN IP address and subnet mask in the remote
gateway
, the secure tunnel fails to connect.
• The IP address range used on the remote LAN has to be dif
ferent from the IP address
range used on the local LAN.