Filter
Top Products
GS700TS Smart Switch Software Administration Manual
Configuring Switching Settings 4-24
v1.0, June 2009
Properties
The Voice VLAN Advanced Properties screen contains information about Voice VLAN on the
device, including the ports enabled and included in the Voice VLAN.
To define Voice VLAN settings:
1. Click Switching > Voice VLAN > Advanced > Properties. The Voice VLAN Advanced
Properties screen displays:
The Voice VLAN Advanced Properties screen contains the following fields:
• VoiceVLAN Status – Select the Voice VLAN status on the device. The possible field
values are:
– Disable – Disables Voice VLAN on the device. This is the default value.
– Enable – Enables Voice VLAN on the device.
• VoiceVLAN ID – Select the Voice VLAN ID number.
• Class of Service – Select the CoS tag to add to incoming packets not containing a VPT
received on the Voice VLAN. The possible field values are 0-7, where zero is the lowest
priority, and seven is the highest priority.
• Remark CoS – Enable or disable reassigning the CoS tag value to packets received on the
Voice VLAN. The possible field values are:
– Disable – Disables remarking the packet CoS tag value. This is the default value.
– Enable – Enables remarking the packet CoS tag value.
Figure 4-17