Filter
Top Products
GS700TS Smart Switch Software Administration Manual
7-7 Monitoring the Switch
v1.0, June 2009
– Alert – Indicates the device needs immediate attention. Alert is the second highest
warning level. An alert log is saved, if there is a serious device malfunction; for
example, all device features are down.
– Critical – Indicates the device is in a critical state. Critical is the third highest warning
level. A critical log is saved if a critical device malfunction occurs; for example, two
device ports are not functioning, while the rest of the device ports remain functional.
– Error – Indicates a device error has occurred; for example, if a single port is offline.
– Warning – Displays the lowest level of a device warning. The device is functioning,
but an operational problem has occurred.
– Notice – Indicates the system is functioning properly, but a system notice is logged.
– Informational – Provides device information.
– Debug – Provides debugging messages.
• Description – Displays the log message text.
2. Click REFRESH or CLEAR LOGS to refresh or reset the Flash Logs screen.
Server Log
The Server Log screen contains information for viewing and configuring the remote log servers.
New log servers can be defined and the log severity sent to each server.
To configure remote log servers:
1. Click Monitoring > Logs > Server Log. The Server Log screen displays:
Figure 7-5