NETGEAR GS748TS Switch User Manual


 
GS700TS Smart Switch Software Administration Manual
7-13 Monitoring the Switch
v1.0, June 2009
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
Frames of 64 Bytes – Displays the number of 64-byte frames received on the interface
since the device was last refreshed.
Frames of 65 to 127 Bytes – Displays the number of 65 to 127 byte frames received on
the interface since the device was last refreshed.
Frames of 128 to 255 Bytes – Displays the number of 128 to 255 byte frames received on
the interface since the device was last refreshed.
Frames of 256 to 511 Bytes – Displays the number of 256 to 511 byte frames received on
the interface since the device was last refreshed.
Frames of 512 to 1023 Bytes – Displays the number of 512 to 1023 byte frames received
on the interface since the device was last refreshed.
Frames of 1024 to 1522 Bytes – Displays the number of 1024 to 1522 byte frames
received on the interface since the device was last refreshed.
RMON Summary Statistics
Interface – Displays the port or LAG for which statistics are displayed.
Drop Events – Displays the number of dropped events that have occurred on the interface
since the device was last refreshed.
Received Bytes – Displays the number of octets received on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.