NETGEAR GS748TS Switch User Manual


 
GS700TS Smart Switch Software Administration Manual
Configuring QoS 5-12
v1.0, June 2009
An aggregate policer can be applied to multiple classes in the same policy map, but an aggregate
policer cannot be used across different policy maps. Define an aggregate policer if the policer is
shared with multiple classes.
policers in one port cannot be shared with other policers in another device. Traffic from two
different ports can be aggregated for policing purposes.
To define policies:
1. Click QoS > CoS> Advanced > Policy Table screen. The Policy Table screen displays:
The Policy Table screen contains the following fields:
Policy Name – Define the user-defined policy name.
Class Map Select a class map for the class.
Action – Define the action assigned to incoming packets exceeding the CIR.
Type – Set the packets’ DSCP, Queue, or CoS tag.
Value – Set the packets’ DSCP, Queue, or CoS tag value.
2. Select a Class Map from the list in the first row.
3. Select an Action and define a new value in the first row.
4. Click APPLY to update the device.
To add a new policy entry:
5. Click QoS > CoS> Advanced > Policy Table. The policy Table screen displays.
6. Select a Class Map from the list in the first row.
Figure 5-8