Filter
Top Products
GS700TS Smart Switch Software Administration Manual
Managing Security 6-27
v1.0, June 2009
• Source Port – Enter the source port that is matched to packets.
• Destination Port – Enter the destination port that is matched to packets.
• Action – Select the action applied to packets with IP addresses that have been filtered. The
possible field values are:
–Permit – Permits access to the device.
– Deny – Denies access to packets originating from the blocked IP address.
–Shutdown – Drops packets that meet the ACL criteria, and disable the port to which
the packet was addressed.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Enter the provided fields in the first row.
5. Click APPLY to update the device.
To add an IPv4 rule:
1. Click Security > ACL > IPv4 Rules. The IPv4 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Click ADD to create a new entry or duplicate an existing entry.
4. Select the added entry.
5. Enter the provided fields in the first row.
6. Click APPLY to update the device.
To delete an IPv4 rule:
1. Click Security > ACL > IPv4 Rules. The IPv4 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Click DELETE to remove the entry.