Filter
Top Products
GS700TS Smart Switch Software Administration Manual
3-19 Managing System Settings
v1.0, June 2009
The SNMPv1/v2 Community Configuration screen contains the following fields:
• Management Station IP – Enter the management station IP address for which the Basic
SNMP community is defined.
• Management Station IP Mask – Enter the management station IP mask for which the
Basic SNMP community is defined. If the Management Station IP Mask is set to
255.255.255.255, only the exact IP address specified in the management Station IP field
can access. If the Management Station IP mask is set to 255.255.255.0, any IP address
matches with the first 3 part of the IP address specified in the Management Station IP can
access.
• Community String – Enter the SNMP community string used to authenticate the
management station to the device.
• Access Mode – Select the access rights of the community. The possible field values are:
– Read Only – Indicates Management access is restricted to read-only. Changes cannot
be made to the device configuration and to the community.
– Read Write – Indicates Management access is read-write. Changes can be made to the
device configuration but not to the community.
– SNMP Admin – Indicates the user has access to all device configuration options, as
well as permissions to modify the community.
2. Select the community entry.
3. Enter the Management Station IP, Management Station IP Mask and Community String
in the provided fields in the first row.
4. Select the Access Mode from the list in the provided field in the first row.
Figure 3-9