Filter
Top Products
GS700TS Smart Switch Software Administration Manual
Getting Started with Switch Management 1-6
v1.0, June 2009
7. Select Disable to disable DHCP.
8. The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you
want different values, enter the switch IP address, gateway IP address and subnet mask.
9. Type your password and click Set. Please ensure that your PC and the GS700TS Gigabit
Stackable Smart Switch are in the same subnet. Note the settings for later use.
NIC Setting on the Host that Accesses the GS700TS Gigabit
Stackable Smart Switch
The settings of your Network Interface Card (NIC) under MS Windows OS are made with entries
into Windows screens similar to the ones shown below. For comparison, the settings screens of the
switch are also shown although they do not appear in the Windows view.
Figure 1-3