Filter
Top Products
Switching Commands
147
ProSafe M4100 and M7100 Managed Switches
command displays the values for that interface whether the interface is enabled for DAI or
not.
Format show ip arp inspection interfaces [slot/port]
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection interfaces
Interface Trust
State Rate Limit Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
0/1 Untrusted 15 1
0/2 Untrusted 10 10
show arp access-list
Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL
name as the argument will display only the rules in that ARP ACL.
Format show arp access-list [acl-name]
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(Switch) #show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08
Term Definition
Interface
The interface ID for each displayed row.
Trust State
Whether the interface is trusted or untrusted for DAI.
Rate Limit
The configured rate limit value in packets per second.
Burst Interval
The configured burst interval value in seconds.