Filter
Top Products
host-association
mapping
primary-vlan-id
secondary-vlan-id
add
remove
secondary-vlan-list
Switching Commands
69
ProSafe M4100 and M7100 Managed Switches
no switchport private-vlan
This command is used to remove the private-VLAN association or mapping from the port.
switchport mode private-vlan
This command is used to configure a port as a promiscuous or host private VLAN port. Note
that the properties of each mode can be configured even when the switch is not in that mode.
However, they will only be applicable once the switch is in that particular mode.
Format switchport mode private-vlan {host | promiscuous}
Mode
Default
host
promiscuous
no switchport mode
This command is used to remove the private-VLAN association or mapping from the port.
Format no switchport mode private-vlan
Mode
Term Definition
Defines VLAN association for community or host ports.
Defines the private VLAN mapping for promiscuous ports.
Primary VLAN ID of a private VLAN.
Secondary (isolated or community) VLAN ID of a private VLAN.
Associates the secondary VLAN with the primary one.
Deletes the secondary VLANs from the primary VLAN association.
A list of secondary VLANs to be mapped to a primary VLAN.
Format no switchport private-vlan {host-association | mapping}
Mode
Interface Config
Interface Config
General
Term Definition
Configures an interface as a private VLAN host port. It can be either isolated or
community port depending on the secondary VLAN it is associated with.
Configures an interface as a private VLAN promiscuous port. The promiscuous ports
are members of the primary VLAN.
Interface Config