Filter
Top Products
Switching Commands
150
ProSafe M4100 and M7100 Managed Switches
no set igmp fast-leave
This command disables IGMP Snooping fast-leave admin mode on a selected interface.
Format no set igmp fast-leave
Mode
Format no set igmp fast-leave
<vlan_id>
Mode
set igmp groupmembership-interval
This command sets the IGMP Group Membership Interval time on a VLAN, one interface, or
all interfaces. The Group Membership Interval time is the amount of time in seconds that a
switch waits for a report from a particular group on a particular interface before deleting the
interface from the entry. This value must be greater than the IGMPv3 Maximum Response
time value. The range is 2–3600 seconds.
Default
Format set igmp groupmembership-interval <2-3600>
Mode
• Interface Config
• Global Config
Format set igmp groupmembership-interval <vlan_id> <2-3600>
Mode
no set igmp groupmembership-interval
This command sets the IGMPv3 Group Membership Interval time to the default value.
Format no set igmp groupmembership-interval
Mode
• Interface Config
• Global Config
Format no set igmp groupmembership-interval <vlan_id>
Mode
set igmp maxresponse
This command sets the IGMP Maximum Response time for the system, or on a particular
interface or VLAN. The Maximum Response time is the amount of time in seconds that a
switch will wait after sending a query on an interface because it did not receive a report for a
Interface Config
VLAN Config
260 seconds
VLAN Config
VLAN Config