Filter
Top Products
IP Multicast Commands
334
ProSafe M4100 and M7100 Managed Switches
Join Prune Interval (secs) 60
DR Priority NA
BSR Border Disabled
Neighbor Count 1
Designated Router NA
show ip pim neighbor
This command displays the neighbor information for PIM on the specified interface.
Format show ip pim neighbor <slot/port>
Modes
Neighbor
Address
Interface
UpTime
Expiry Time
DR Priority
(Switch) #show ip pim neighbor 0/1
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 0/1 00:02:55 00:01:15 NA
(Switch) #show ip pim neighbor
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 0/1 00:02:55 00:01:15 1
192.168.20.2 0/2 00:03:50 00:02:10 1
ip pim sparse(Global Config)
This command is used to administratively enable PIM Sparse Mode (PIM-SM) multicast
routing mode on the router.
Default
Format ip pim sparse
Mode
Privileged EXEC
Term Definition
The IP address of the PIM neighbor.
Interface number. Valid slot and port number separated by forward slashes.
The time since this neighbor has become active on this interface.
Time remaining for the neighbor to expire.
DR Priority configured on this Interface [ PIM -SM only ].
disabled
Global Config