Filter
Top Products
Quality of Service (QoS) Commands
482
ProSafe M4100 and M7100 Managed Switches
number indicates higher precedence order. If a sequence number is already in use for this
interface and direction, the specified access list replaces the currently attached IP access list
using that sequence number. If the sequence number is not specified for this command, a
sequence number that is one greater than the highest sequence number currently in use for
this interface and direction is used.
Note: The <out> option might not be available, depending on the platform.
no ip access-group
This command removes a specified IP ACL from an interface.
Default
Format no ip access-group <accesslistnumber> {{control-plane|in|out}|vlan
<vlan-id> {in|out}}
Mode
• Interface Config
• Global Config
acl-trapflags
This command enables the ACL trap mode.
Default
Format acl-trapflags
Mode
no acl-trapflags
This command disables the ACL trap mode.
Format no acl-trapflags
Mode
Default
none
Format ip access-group {<accesslistnumber>|<name>}
{{control-plane|in|out}|vlan <vlan-id> {in|out}}[sequence
<1-4294967295>]
Modes
• Interface Config
• Global Config
none
disabled
Global Config
Global Config