Filter
Top Products
Routing Commands
224
ProSafe M4100 and M7100 Managed Switches
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format no arp dynamicrenew
Mode
arp purge
This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format arp purge <ipaddr>
Mode
arp resptime
This command configures the ARP request response time-out.
The value for <seconds> is a valid positive integer
, which represents the IP ARP entry
response time-out time in seconds. The range for <seconds> is between 1-10 seconds.
Default
Format arp resptime <1-10>
Mode
no arp resptime
This command configures the default ARP request response time-out.
Format no arp resptime
Mode
arp retries
This command configures the ARP count of maximum request for retries.
The value for <retries> is an integer
, which represents the maximum number of requests
for retries. The range for <retries> is an integer between 0-10 retries.
Default
Format arp retries <0-10>
Mode
Privileged EXEC
Privileged EXEC
1
Global Config
Global Config
4
Global Config