Filter
Top Products
RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual
USB Storage 7-5
v1.0, November 2009
Alternately, you can also type \\readyshare in the address field of your Web browser.
The following table explains the fields and buttons in this screen:.
Note: If you logged in to the router before you connected your USB device, you might
not see your USB device in the router screens until you log out and then log back in
again.
Table 7-1. USB Storage Basic Settings
Fields and Buttons Description
Network Device Name The default is \\readyshare. This is the name used to access the
USB device connected to the router.
Available Network
folders
Share Name If only 1 device is connected, the default share name is
USB_Storage. You can click the name shown or you can type it in
the address field of your Web Browser. If Not Shared is shown, the
default share has been deleted and no other share for the root
folder exists. Click the Edit button to change this setting.
Read/Write
Access
Shows the permissions/access controls on the network folder: All –
no password (the default) allows all users to access the network
folder. The user name (account name) for All – no password is
guest. The password for admin is the same one that you use to
log in to the router main menu. By default, it is password.
Folder Name Full path used by the network folder:
Volume Name Volume name from the storage device (either USB drive or HDD).
Total/Free
Space
Shows the current utilization of the storage device.
Edit button Click the Edit button to edit the Available Network folder settings.
See “Editing a Network Folder” on page 7-6.
Safely Remove USB Device button Click to safely remove the USB device attached to your router. See
“Unmounting a USB Drive” on page 7-10.