Filter
Top Products
5-1
v1.0, November 2009
Chapter 5
Customizing Your Network Settings
This chapter describes advanced features of the RangeMax Wireless-N Gigabit Router with USB
WNR3500L. This chapter includes the following sections:
• “Using the LAN IP Setup Options”
• “Using a Dynamic DNS Service” on page 5-5
• “Configuring the WAN Setup Options” on page 5-7
• “Configuring Static Routes” on page 5-9
• “Allowing Inbound Connections to Your Network” on page 5-11
• “Configuring Port Forwarding to Local Servers” on page 5-16
• “Configuring Port Triggering” on page 5-18
• “Wireless Repeating (Also Called WDS)” on page 5-21
Using the LAN IP Setup Options
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router’s default LAN IP configuration is:
• LAN IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.