NETGEAR WPN824V3 Network Router User Manual


 
RangeMax Wireless Router WPN824v3 User Manual
4-4 Managing Your Network
v1.0, January 2008
Internet Port MAC Address The Ethernet MAC address being used by the Internet
(ADSL) port of the wireless router.
IP Address The IP address used by the Internet (ADSL) port of the
wireless router. If no address is shown, the wireless router
cannot connect to the Internet.
DHCP Indicates if the IP address is assigned automatically.
IP Subnet Mask The IP subnet mask used by the Internet (ADSL) port of the
wireless router.
Domain Name
Server
The Domain Name Server (DNS) IP addresses used by the
wireless router. These addresses are usually obtained
dynamically from the ISP.
LAN Port MAC Address The Ethernet MAC address used by the local (LAN) port of
the wireless router.
IP Address The IP address used by the local (LAN) port of the wireless
router. The default is 168.192.0.1.
DHCP If Off, the wireless router does not assign IP addresses to
PCs on the LAN.
If On, the wireless router assigns IP addresses to PCs on
the LAN.
IP Subnet Mask The IP subnet mask used by the local (LAN) port of the
wireless router. The default is 255.255.255.0.
Wireless Port.
See Chapter 2,
“Wireless
Settings,” for
details.
Name (SSID) The service set ID, also known as the wireless network
name.
Region The country where the unit is set up for use.
Channel The current channel, which determines the operating
frequency.
Mode The current wireless connection mode.
Wireless AP Indicates if the Access Point feature is disabled or not. If not
enabled, the Wireless light on the front panel turns off.
Broadcast Name Indicates if the wireless router is configured to broadcast its
SSID.
Table 4-1. Router Status Fields (continued)
Field Description