Filter
Top Products
RangeMax Wireless Router WPN824v3 User Manual
Troubleshooting 6-3
v1.0, January 2008
If the error persists, you have a hardware problem and should contact Technical Support.
Lights Never Turn Off
When the router is turned on, the lights turn on for about 10 seconds and then turn off. If all the
lights stay on, there is a fault within the router.
If all lights are still on one minute after power-up:
• Turn the power off and on to see if the router recovers.
• Clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. This procedure is explained in
“Restoring the Default Configuration and
Password” on page 6-8.
If the error persists, you might have a hardware problem and should contact Technical Support.
LAN or Internet Port Lights Are Not On
If either the LAN lights or Internet light does not light when the Ethernet connection is made,
check the following:
• Make sure that the Ethernet cable connections are secure at the router and at the hub or
workstation.
• Make sure that power is turned on to the connected hub or workstation.
• Be sure that you are using the correct cable.
When connecting the router’s Internet port to a cable or DSL modem, use the cable that was
supplied with the cable or DSL modem. This cable could be a standard straight-through
Ethernet cable or an Ethernet crossover cable.