![](http://pdfasset.owneriq.net/b/4d/b4daec9f-0a53-4a7e-a920-cc9bb48c9b87/b4daec9f-0a53-4a7e-a920-cc9bb48c9b87-bg46.png)
RangeMax Wireless Router WPN824v3 User Manual
5-14 Advanced Settings and Features
v1.0, January 2008
3. Click Add or Edit. The following screen displays:
Figure 5-8
4. Enter the settings for the static route.
• Route Name. This is for identification purposes only.
• Private. If you want to limit access to the LAN only, then select this check box. The static
route will not be reported in RIP.
• Active. You must select this check box to make this route effective.
• Destination IP Address. The IP address of the final destination.
• IP Subnet Mask. If the destination is a single host, type 255.255.255.255.
• Gateway IP Address. This must be a router on the same LAN segment as your wireless
router.
• Metric. Type a number between 2 and 15. This represents the number of routers between
your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct
connection, set it to 2.
5. Click Apply. The static route is added to the Static Routes table.