Netopia R7200 Network Router User Manual


 
IPX Setup 11-5
7. Select Default Gateway Address and enter the network address of the IPX network to which all packets of
unknown destination address should be routed.
Note: The default gateway address is usually set up to match the IPX Address in your network connection
profile.
8. To configure filters and filter sets, select Filters and Filter Sets and go to the IPX filters and filter sets
screens. For information on how to configure IPX filters and filter sets, see “IPX filters” on page 14-21.
9. Select IPX Wan Pool Base Address and enter the first IPX network address to be allocated to requesting
IPX WAN clients. The base address you enter must not conflict with other IPX networks assigned to your IPX
internet.
IPX routing tables
IPX routing tables provide information on current IPX routes and services.
To go to the IPX Routing Table screen, select IPX Routing Table in the Statistics & Logs screen. This table
shows detailed information about current IPX network routes.
To go to the IPX SAP Bindery Table screen, select IPX SAP Bindery Table in the Statistics & Logs screen. This
table shows detailed information about available IPX services and their location.
Main
Menu
• IPX Routing Table
• IPX SAP Bindery Table
Statistics & Logs
IPX Routing Table
Net Addr-Hops-Ticks-Type--Status-Interface--------------via Router------------
-----------------------------------SCROLL UP----------------------------------
00000020 2 3 RIP Active Ethernet 00000120:00000c465c2f
00000030 2 12 RIP Active Ethernet 00000120:00000c465c2f
00000033 4 14 RIP Active Ethernet 000000120:00000c465c2f
00000100 2 7 RIP Active Ethernet 00000120:00000c465c2f
00000110 1 1 RIP Active Ethernet 00000120:00000c465c2f
---------------------------------SCROLL DOWN-----------------------------
UPDATE