Netopia R7200 Network Router User Manual


 
13-2 User’s Reference Guide
General status
Current Date: The current date; this can be set with the Date and Time utility (see “Date and time” on
page 8-12).
Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via
DHCP. This is the value you assigned in the Default IP Gateway field on page 7-7. If you are using the router’s
defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway,
it is shown here.
CPU Load: Percentage of the system’s resources being used by all current transmissions.
Unused Memory: The total remaining system memory available for use.
Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you
have assigned an IP address as your default gateway, it is shown here.
Domain Name: The domain name you have assigned, typically the name of your ISP.
MAC Address: The Netopia R7200’s hardware address, for those interfaces that support DHCP.
IP Address: The Netopia R7200’s IP address, entered in the IP Setup screen.
IPX Address: The Netopia R7200’s IPX address, entered in the IPX Setup screen.
EtherTalk Address: The Netopia R7200’s AppleTalk address on its EtherTalk Phase II interface, entered in the
EtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).
LocalTalk Address: The Netopia R7200’s AppleTalk address on its LocalTalk interface, entered in the LocalTalk
Setup screen (only if the optional AppleTalk feature set is installed).
Quick View 12/3/1998 02:41:39 PM
Default IP Gateway: 0.0.0.0 CPU Load: 5% Unused Memory: 602 KB
Domain Name Server: 0.0.0.0
Domain Name: netopia.com
----------------MAC Address--------IP Address-------IPX Address---------------
Ethernet Hub: 00-00-c5-70-03-48 192.168.1.1
SDSL WAN1: 00-00-c5-70-03-4a 0.0.0.0
Current DSL Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP Port1 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
LED Status
PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 CH2 LNK LNK LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
G - - - - Y - - - - - - | 'R'= Red 'Y'= Yellow