Netopia R7200 Network Router User Manual


 
13-12 User’s Reference Guide
System Information
The System Information screen gives a summary view of the general system level values in the Netopia R7200
SDSL Router.
From the Statistics & Logs menu select System Information. The System Information screen appears.
The information display varies by model, firmware version, feature set, and so on. You can tell at a glance your
particular system configuration.
SNMP
The Netopia R7200 includes a Simple Network Management Protocol (SNMP) agent, allowing monitoring and
configuration by a standard SNMP manager.
The Netopia R7200 supports the following management information base (MIB) documents:
MIB II (RFC 1213)
Interface MIB (RFC 1229)
Ethernet MIB (RFC 1643)
AppleTalk MIB I (RFC 1243)
Netopia MIB
These MIBs are on the Netopia R7200 CD included with the Netopia R7200. Load these MIBs into your SNMP
management software in the order they are listed here. Follow the instructions included with your SNMP
manager on how to load MIBs.
System Information
Serial Number 70-02-ec (7340780)
Firmware Version 4.3
Processor Speed (MHz) 33
Flash ROM Capacity (MBytes) 1
DRAM Capacity (MBytes) 4
Ethernet 8 Port 10Base-T
Auxiliary Serial Port Switched Async
WAN 1 Interface SDSL
WAN 2 Interface Not Installed
AppleTalk Feature Set Installed
User Restriction (# users) 13
Analog Dial-In Kit Installed