Netopia R7200 Network Router User Manual


 
3-2 User’s Reference Guide
What you need
Locate all items that you need for the installation.
Included in your router package are:
The Netopia R7200 SDSL Router
A power adapter and cord with a mini-DIN8 connector
One RJ-45 Ethernet cable
One RJ-11 Telco (or Line) cable
A dual DE-9 and mini-DIN8 to DE-9 console cable (for a PC or a Macintosh)
The Netopia CD containing an Internet browser, Adobe Acrobat Reader for Windows and Macintosh, ZTerm
terminal emulator software and NCSA Telnet for Macintosh, and documentation
You will need:
A Windows 95 or 98–based PC or a Macintosh computer with Ethernet connectivity for configuring the
Netopia R7200. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See
“Before running SmartStart” on page 5-2.
An SDSL wall outlet wired for a connection to a Competitive Local Exchange Carrier (CLEC) who supports
Symmetric Digital Subscriber Line connections.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
The figure below displays the back of the Netopia R7200 SDSL Router.
Netopia R7200 with SDSL back panel
1. Connect the mini-DIN8 connector from the power adapter to the power port, and plug the other end into an
electrical outlet.
2. Connect one end of the RJ-11 cable to the Line port, and the other end to your SDSL wall outlet.
Ethernet
Normal
Auxiliary Console Power
Line
8 port Ethernet hub
Crossover switch
Line port
Auxiliary port
Console port
Power port
8
1
1
Uplink