Filter
Top Products
WAN and System Configuration 8-7
The Default Profile screen appears.
■ You can set Must Match a Defined Profile item to Yes or No (the default). This item controls whether or
not the SDSL link will come up without an explicitly configured connection profile. If your ISP is serving you
a dynamic IP Address, you need not explicitly configure a connection profile, and the default behavior of the
router will be to connect automatically once it is powered on.
If Must Match a Defined Profile is set to No, then an IP Enabled item is visible. Toggling this item to Yes
(the default) or No controls whether or not IP will be supported on the SDSL link. If IP Enabled is set to Yes,
an IP Parameters item becomes visible. If you select IP Parameters the IP Parameters screen appears
(see “IP parameters (default profile) screen” on page 8-8). This screen allows you to configure various IP
parameters for SDSL connections established without an explicitly configured connection profile.
If Must Match a Defined Profile is set to No, then an IPX Enabled item is visible. Toggling this item to Yes
or No (the default) controls whether or not IPX will be supported on the SDSL link. If IPX Enabled is set to
Yes, an IPX Parameters item becomes visible. If you select IPX Parameters, the IPX Parameters screen
appears (see “IPX parameters (default profile) screen” on page 8-9). This screen allows you to configure
various IPX parameters for SDSL connections established without an explicitly configured connection
profile.
Main
Menu
WAN
Configuration
Default
Profile
Default Profile
Must Match a Defined Profile: No
IP Enabled: Yes
IP Parameters...
IPX Enabled: Yes
IPX Parameters...
Return/Enter accepts * Tab toggles * ESC cancels.
Configure Default WAN Connection Parameters here.