Filter
Top Products
298
U
Selecting Ye s allows adjustments that are normally made by
holding the I, E, M, ISO, QUAL, or WB button and rotating a
command dial to be made by rotating the command dial after the
button is released (this also applies to the button to which
bracketing is currently assigned; 0 295).
Setting ends when any of
the affected buttons is pressed again or the shutter-release button
is pressed halfway.
Except when No limit is selected for Custom
Setting c2 Auto meter-off delay, setting will also end when the
exposure meters turn off.
Menus
and
playback
If Off is selected, the multi selector is used to choose the
picture displayed during full-frame playback, highlight
thumbnails, and navigate menus.
If On is selected, the main
command dial can be used to choose the picture displayed
during full-frame playback, move the cursor left or right during
thumbnail playback, and move the menu highlight bar up or
down.
The sub-command dial is used to display additional
photo information in full-frame playback and to move the
cursor up or down during thumbnail playback.
While menus
are displayed, rotating the sub-command dial right displays
the sub-menu for the selected option, while rotating it left
displays the previous menu.
To make a selection, press 2, the
center of the multi selector, or J.
f9: Release Button to Use Dial
G button ➜ ACustom Settings menu
Option Description