Filter
Top Products
32
s
SD memory cards: Holding the card as
shown, slide it into the SD card slot until
it clicks into place.
The green access
lamp will light briefly.
If this is the first time the memory card will be used after being
used or formatted in another device, format the card as
described on page 34.
4 Close the card slot cover.
D Inserting Memory Cards
Inserting memory cards upside down or backwards could damage
the camera or the card.
Check to be sure that the card is in the
correct orientation.
A Using Two Memory Cards
See page 72 for information on choosing
the roles played by each card when two
cards are inserted in the camera.
D Memory Card Icons
The memory cards currently inserted in the
camera are indicated as shown (the example at
right shows the icons displayed when both a
CompactFlash and an SD card are inserted).
If
the memory card is full or locked or an error has
occurred, the icon for the affected card will
blink (0 381).
Control panel
Information display
2
GB
SD card slot
Access lamp