Filter
Top Products
Overview Appendices
Return to fi rst page
52
Using Camera Control Pro
Camera Control Pro 2
The Camera Control Pro Window 3/4
Shoot Buttons
Click either of these buttons to take a photograph at current settings. If a D3, D2-se-
ries, D300, D200, D80, D70-series, D50, or D40-series camera is connected, photos can
be taken in continuous shooting mode; in this case, the AF and Shoot and Shoot
buttons will instead be labeled AF and Start and Start. Continuous shooting with
D1-series and D100 cameras can only be performed with shutter-release button on
the camera body; the shooting buttons in the “Camera Control Pro” dialog can only
be used to take pictures one at a time.
AF and Shoot /
AF and Start
When this button is clicked, the camera will perform an autofocus operation
and then re lease the shut ter to take a pho to graph.
Shoot / St art
Click this button to take a photograph. If the selected focus mode is AF-A (D80,
D50, and D40 series cameras) or single-servo AF, an autofocus operation will be
performed before the shut ter is released.
The Function Dial
D100
The D100 can only be used to take photographs when the function dial is set to P, S, A, or M. At other
settings, the shoot buttons in the “Camera Control Pro” dialog will be disabled and the simulated
LCD panel will not be displayed.