Filter
Top Products
Overview Using Camera Control Pro
Return to fi rst page
93
Appendices
Camera Control Pro 2
Device Registration Windows XP 1/4
Registering the IEEE 1394 Interface Board
Confi rm that the OHCI-compliant IEEE 1394 interface board or card has been cor-
rectly registered with the system.
Logging On
Log on as the “Computer Administrator” when registering the camera.
Before Connecting the Camera
Be sure to install Camera Control Pro before connecting the camera to the computer.
1
Open the Device Manager
Open the Device Manager.
If the camera has been correctly registered
with the system, the controller for your camera should appear under “1394
Bus Controller.”
If “IEEE 1394 Bus host controllers” is not listed in the Device Manager, or if the
IEEE 1394 interface board or card is listed as an unknown or miscellaneous
device or is preceded by a red or yellow warning icon, follow the instructions
in the manual provided with the board to ensure that the drivers are properly
installed.
2
Install the driver for D1-series cameras from the Camera Control Pro CD, then
connect the camera to the computer using an IEEE 1394 cable and turn the
camera on.
The camera will be registered automatically.