Overview Appendices
Return to fi rst page
64
Using Camera Control Pro
Camera Control Pro 2
Camera Controls 11/ 18
Continuous Mode (All Models Except
D1 series D100
)
The amount of memory remaining in the camera memory buff er is displayed at the right edge of
the simulated LCD panel. This information is updated at regular intervals, but temporary discrepan-
cies may exist between the display and the actual amount of memory remaining in the buff er.
Non-CPU Lenses
The following restrictions apply to Camera Control Pro when a non-CPU lens is mounted on the
camera (the operations listed can still be performed using the controls on the camera body; see the
camera manual for details):
D300
D3 D2 series
D200
D1 series D100 D50
D80 D70 series
D40 series
With lens data No data
Exposure
Mode
Can be selected from Aperture-prior-
ity auto and Manual.
Can not be adjust-
ed. Mode select-
ed with camera
displayed. Photos
can only be taken
in mode M.
Can only be ad-
justed if
Enable
Enable
controls on the
controls on the
camera body
camera body is not
checked. Otherwise
same as D100.
Shutter Speed Can only be adjusted in manual exposure mode.
Aperture Shown with asterisk. Aperture shown as “f/--”. Can not be adjusted.
AF and Shoot Can not be used.
Shoot Can be used. Can be used.*
* Warning will be displayed in exposure modes other than M.