Filter
Top Products
Overview Appendices
Return to fi rst page
56
Using Camera Control Pro
Camera Control Pro 2
Camera Controls 3/18
The Exposure 2 Tab
The following settings can be adjusted from the Exposure 2 tab.
Focus Point
Focus Area
The focus point and focus area can be selected using the arrow buttons; see the
camera manual for details. For information on AF-area mode and focus mode, see
“The Mechanical Tab.”
“The Mechanical Tab.”
Metering
Mode
The metering mode can be selected from this menu (D3, D2 series, D300, D200,
D80, D70 series, D50, and D40 series only). Metering mode defaults to the option
selected with the camera. If a D1-series or D100 camera is connected, the current
metering mode will be shown, but changes can only be made using camera con-
trols. See the camera manual for details.
Flash Sync
Mode
This option controls the camera fl ash sync mode. See the camera manual for de-
tails.