Filter
Top Products
Alteon OS Application Guide
Chapter 12: OSPF
20142C4911, January 2007
3. Enable OSPF authentication for Area 2 on switch 4.
4. Configure a simple text password up to eight characters for the virtual link between Area
2 and Area 0 on switches 2 and 4.
Use the following commands to configure MD5 authentication on the switches shown in Fig-
ure 12-4:
1. Enable OSPF MD5 authentication for Area 0 on switches 1, 2, and 3.
2. Configure MD5 key ID for Area 0 on switches 1, 2, and 3.
3. Assign MD5 key ID to OSPF interfaces on switches 1, 2, and 3.
4. Enable OSPF MD5 authentication for Area 2 on switch 4.
5. Configure MD5 key for the virtual link between Area 2 and Area 0 on switches 2 and 4.
>> # /cfg/l3/ospf/aindex 2/auth password
(Turn on OSPF password authenti-
cation)
>> #
/cfg/l3/ospf/virt 1/key alteon
>> #
/cfg/l3/ospf/aindex 0/auth md5 (Turn on MD5 authentication)
>> #
/cfg/l3/ospf/md5key 1/key test
>> # /cfg/l3/ospf/if 1
>> OSPF Interface 1 # mdkey 1
>> OSPF Interface 1 # ../if 2
>> OSPF Interface 2 # mdkey 1
>> OSPF Interface 1 # ../if 3
>> OSPF Interface 3 # mdkey 1
>> # /cfg/l3/ospf/aindex 2/auth md5
>> # /cfg/l3/ospf/md5key 2/key alteon