Alteon OS Application Guide
Chapter 4: Ports and Trunking
9742C4911, January 2007
Port Trunking Example
In the example below, three ports are trunked between two switches.
Figure 4-2 Port Trunk Group Configuration Example
Prior to configuring each switch in the above example, you must connect to the appropriate
switch’s Command Line Interface (CLI) as the administrator.
NOTE – For details about accessing and using any of the menu commands described in this
example, see the Alteon OS Command Reference.
Alteon Application Switch
BladeCenter
GbE Switch
Module
Trunk 3: Ports 2, 12, and 22
Trunk 1: Ports EXT1, EXT2, and EXT3