Filter
Top Products
114
NN42020-110 MCS 5100 Release 4.0 Standard 01.05 January 2008
Standard
Specifying four levels increases overload control. If you specify only two levels,
or after an upgrade (only two levels exist), the system blocks everything but in-
session messages after the Severe threshold is exceeded. After the call queue
drops back below the threshold, the alarm clears and the MCS stops blocking new
sessions.
Configuring call queue thresholds
1 Start the System Management Console.
2 Navigate to Network Elements > Session Managers.
3 Expand the <Session Manager> and select Instance.
The <Session Manager Instance> Engineering parameters dialog box appears
in the right pane.
4 Select the CallQueue Thresholds parameter and click -/+.
5 In the Value text box, enter the new parameters, for example, 60, 70, 85, 100,
and click Apply.