Filter
Top Products
67
System Management Console User Guide
Standard
Modifying a network element instance.
Any changes require a manual restart of the network element instance to take
effect, and the changes apply to only a single network element instance; for
redundant network elements, the change must be made to other network element
instances too. To perform this procedure you must have NEInstanceService and
EngParmService privileges.
The only appropriate modification to an NE Instance is to the load during an
upgrade, or to move the NE Instance to a different server.
1 From the configuration view, select Network Elements > <ne_type> > <ne>
> Instance.
The Instance window appears in the work area.
2 Select the network element instance to modify from the Instance window and
click Edit.
The Edit Instance dialog box appears.
3 Click Advanced on the Edit Instance dialog box.
The Edit Eng Parms window appears in the work area. Engineering
parameters are organized by Parm Group.
4 From the drop-down menu, select the Parm Group to modify.
The engineering parameters appear on the Instance Eng Parms window.
5 From the Instance Eng Parms window, select the engineering parameter to
modify, and click Edit.
The Edit Eng Parms dialog box appears.
6 Enter a new value for the engineering parameter.
For help, move the pointer over the parameter.
7 Click Apply.
Caution: Before performing this procedure, contact your next level of
support. Engineering parameters must not be modified in the field.
Modifying the engineering parameters for a network element instance can
reduce the performance and services of the network element.