Filter
Top Products
36
NN42020-110 MCS 5100 Release 4.0 Standard 01.05 January 2008
Standard
Before you add a server to the MCS network, you must add the server IP address,
in the Addresses window and associate a Logical Name with that IP Address. You
cannot delete an IP address if a third-party Trusted Device, Gateway, Operations
Support System (OSS) Server, or server that hosts an MCS network element is
configured against the Logical Name for that IP address. You can change the IP
address, but services are interrupted.
Configuring an IP address
Use the following procedure to enter Addresses for servers and network elements.
1 In the System Management Console navigation pane, select Network Data
and Mtc >Addresses.
2 In the Addresses window, click Add or select an entry and click Edit.
3 Enter the configuration data.
Both fields, Logical Name and IP Address, must be unique values.
4 Click Apply.
Deleting an address
1 In the System Management Console, in the Addresses window, select an
entry.
2 Click Delete.
3 Click Yes to confirm the delete.
Note: Editing an entry and changing the IP address disrupts service for
the network element and all services for the network elements deployed
on the server
Note: Before deleting an address, you must delete the network element
or server that uses that IP address.