Filter
Top Products
68
NN42020-110 MCS 5100 Release 4.0 Standard 01.05 January 2008
Standard
8 Click OK to confirm the warning.
You must manually restart for the changes to take effect. For information on
how to perform a manual restart, see the documentation for the particular
network element type.
Modifying configuration parameters
Every network element type has some configurable operating parameters. Which
parameters can be configured, depends on the network element type. To perform
this procedure you must have ConfigParmService privileges.
1 In the System Management Console, from the configuration view, select
Network Elements > <ne_type> > <ne> > Configuration Parameters.
2 In the Config Parms window, from the drop-down list, select a parameter
group.
3 Select the parameter to modify and click Edit.
4 In the Edit Config Parms dialog box, enter a new value for the configuration
parameter.
5 Click Apply.
The system validates the new value. If the value is valid, the Edit Config Parm
window closes and the configuration parameter updates.
Deleting a network element
To perform this procedure you must have NEService and NEInstanceService
privileges.
1 In the System Management Console, from the configuration view, select
Network Elements > <ne_type> > <ne> > NE Maintenance.
2 From the Maintenance window, select each network element instance and
click Stop.
Caution: Administrators can delete a network element on a server.
However, before you remove any network element, contact your next
level of support to determine the potential effect on the system.