Filter
Top Products
77
System Management Console User Guide
Standard
1 In the System Management Console, in the Configuration view, expand
Network Elements.
1 Under Network Elements, expand IPCM Configuration.
2 Under IPCM Configuration, select IPCM Profile Server.
3 In the IPCM Profile Server window, select the profile that you want to
configure.
OR
To add a new profile, click Add.
4 In the Edit IPCM Profile Server window, enter the configuration parameters.
5 Click Apply
Verifying firmware codes
Use the System Management Console to check the firmware load prior to an
upgrade, or to verify the correct telephone firmware is loaded after an upgrade.
1 In the System Management Console configuration view, expand Network
Elements. > IPCM Configuration > IP Client Managers >
<IPCM_instance>.
2 Under <IPCM_instance>, select Configuration Parameters.
3 In the Parameter Configuration window, from the Parm Group list, select
Firmware.
Table 10 “Firmware Codes” on page 77 lists firmware codes and
corresponding telephone types. Firmware codes that are not listed, are not
used or define a firmware string for device emulation; in which case, upgrade
is not supported.
Table 10 Firmware Codes
Code Telephone
FirmwarePhase0x01 IP Phone 2002 Phase 1
IP Phone 2004 Phase 1
FirmwarePhase0x02 IP Phone 2001
IP Phone 2002 Phase 2
IP Phone 2004 Phase 2