Filter
Top Products
73
System Management Console User Guide
Standard
Killing a network element
The Kill operation stops the MCS software that is running on the network element
instance; the operating system continues to run. The instances terminates
immediately and there is no system cleanup prior to shutdown. Use this operation
if stop and restart do not resolve the problem.
1 In the System Management Console, from the configuration view, select
Network Elements > <ne_type> > <ne> > NE Maintenance.
2 From the Maintenance window, select the instance to restart, and click Kill.
3 Click Yes to confirm the warning.
The network element instance changes to OFFLINE.
MCS system without a BCP
If the MCS system does not include a Border Control Point (BCP), you must
configure the following Session Manager parameters from the MediaPortal Parm
Group to true:
• DisableFirewallPortalStrategy
• IgnorempRules
For more information, see Session Manager Fundamentals (NN42020-107).
Configuring Session Manager parameters
To perform this procedure you must have ConfigParmService privileges.
1 In the System Management Console, from the configuration view, select
Network Elements > Session Managers > SESM<instance> >
Configuration Parameters.
2 In the Config Parms window, from the drop-down list, select MediaPortal.
3 Select the parameter to modify and click Edit.
4 In the Edit dialog box, from the Value list, select true.
5 Click Apply.