Filter
Top Products
75
System Management Console User Guide
Standard
IPCM profile
With the IPCM profile feature, you can upgrade IP Phones 2004 that have the
Unistim firmware to SIP firmware. All configuration for the SIP phones (such as
the domain name, IP address of the session manager, and the Trivial File
Transport Protocol (TFTP) server IP address) is uploaded during the upgrade
process.
Use the System Management Console to configure the required MCS parameters.
For more information about the IPCM profile feature, see IP Client Manager
Fundamentals (NN42020-106) and SIP Phone Commissioning (NN42020-302).
For information about how to verify the current firmware load, see “Verifying
firmware codes” on page 77.
This feature requires a TFTP server for firmware updates to the phones. After the
upgrade to the SIP firmware, you must perform all updates by using TFTP. This
feature also uses a Domain Name System (DNS) server to resolve domain names.
Before you configure this feature, you must add the addresses for the TFTP and
DNS servers in the Addresses window. For more information about how to add
addresses, see “Configuring an IP address” on page 36.
IPCM profile configuration
Table 8 “IPCM profile parameters” on page 75 lists the configuration parameters
for the IPCM profile feature.
Table 8 IPCM profile parameters
Parameter Value
S1 Session Manager instance
S2 IPCM instance
TFTP server Logical name of the TFTP server
DNS server Logical name of the DNS server