Filter
Top Products
Chapter 2 CLI Command Summary 105
Reference for the Contivity VPN Switch Command Line Interface
Example
CES#reload in 8:00 restart boot-drive ide1 power-off
disable-logins
Reload Scheduled Shutdown in 480 minutes
Reload Explanation: Scheduled Shutdown in 480 minutes
After Shutdown: Powerdown
Disable New Logins: Yes
Disable Logins after Restart: No
Boot Mode: Normal
Config File: latest
Boot Drive: /ide1/
Proceed with reload? [confirm]y
This example command powers down the switch in eight hours time. When the
switch is powered up again it will reboot from ide1. Further logins are disabled
until the switch has rebooted.
Comments
After a successful reload in command, the switch will reboot after the time
specified has elapsed. For most Telnet client software, the reboot will cause the
Telnet client to close the connection to the switch.
If there are any outstanding reboot commands, they will be canceled. There can be
only be one reboot scheduled at any time.