Filter
Top Products
96 Chapter 2 CLI Command Summary
311645-A Rev 00
factory The switch should be rebooted with the reset configuration file.
This file sets the switch to basic defaults, the contents of the
LDAP database and other settings are still maintained.
config-name Name of previously saved configuration to use on reboot.
disable-logins No more logins should be permitted before the reboot occurs.
disable-after-restart Logins should not be permitted after the reboot. This is
intended to support system maintenance tasks after a reboot.
text If present, this gives the reason for a reload command. This
reason will be displayed on the Admin->Shutdown and
Status->System Web management pages.
If the value for the text parameter contains spaces, it may be
enclosed in double quotes so that it has a single parameter
value.
Default
The default settings for this command are determined by any previous reload
command. For the first reload command, the following defaults apply:
restart
boot-drive ide0
config-file latest
Command mode
Privileged Exec
Next command mode
Privileged Exec