Filter
Top Products
98 Chapter 2 CLI Command Summary
311645-A Rev 00
Example
CES#reload at 22:00 restart boot-drive ide0
disable-after-restart Backup LDAP database
Reload Scheduled Shutdown at 22:00:00
Reload Explanation: Backup LDAP database
After Shutdown: Restart
Disable New Logins: No
Disable Logins after Restart: Yes
Boot Mode: Normal
Config File: latest
Boot Drive: /ide0/
Proceed with reload? [confirm]y
This reboots the switch from ide0, using the latest configuration and disabling
logins after the reboot to allow for system maintenance. Reason is to "Backup
LDAP database."
Comments
After a successful reload at command, the switch will reboot at the time specified
based on internal clock settings. For most Telnet client software, the reboot will
cause the Telnet client to close the connection to the switch.
If there are any outstanding reboot commands, they will be canceled. There can be
only be one reboot scheduled at any time.