Filter
Top Products
Chapter 2 CLI Command Summary 95
Reference for the Contivity VPN Switch Command Line Interface
reload at
This command sets a time in the future at which the switch will reboot. Options
can be specified to determine whether the switch turns off or reboots, which
configuration to use after a reboot, and other settings.
The user is prompted to confirm that they want to continue with the reload. If they
say yes and if the reload command is valid, the system reload will start at the
specified time.
Syntax
reload at hh:mm [power-off|restart] [boot-safe|boot-normal]
[boot-drive {ide0|ide1}]
[config-file {latest|factory|config-name}] [disable-logins]
[disable-after-restart] [text]
Parameters
hh:mm The time at which the shutdown will commence. Values are
based on a 24 hour clock. If this time has already passed today,
then the reload will occur at this time tomorrow.
power-off If present, the switch will power down after it has completed
shutdown.
restart If present, the switch restarts after it has completed shutdown.
boot-safe If present, switch restarts in safe boot mode.
boot-normal If present, switch restarts in normal boot mode.
boot-drive Specify the drive from which the switch will reboot.
ide0|ide1 Disk drive from which bootable image will be loaded.
config-file Specify which configuration should be used after a reboot.
latest The switch should be rebooted with the latest configuration file.