Filter
Top Products
Chapter 1 Introduction 39
Reference for the Contivity VPN Switch Command Line Interface
Key bindings
You can use the Nortel Networks CLI (NNCLI) commands to edit command line
text entries. Table 2 describes key bindings for NNCLI.
exit Exit from configure mode
help Display message about using help
ip http server Enable/disable HTTP management
ldap Control LDAP server (Mini-CLI)
load Bulk load configuration commands
(Mini-CLI)
logging history Control system logging level
logout Exit the Telnet session (Mini-CLI)
reset Set switch system boot mode
(Mini-CLI)
restore flash Restore factory default switch flash
settings
restore system Restore factory default switch
configuration
restrict Restrict management access to
(Mini-CLI)
save current_boot Save current boot config (Mini-CLI)
shutdown Shutdown the switch (Mini-CLI)
snmp-server contact Set the contact details for the switch
snmp-server location Set the locations details for the switch
snmp-server name Set the administrative name for the
switch
Table 5 NNCLI key bindings
Keys Function
control-A start of line
control-B back 1 character
control-C abort command
Table 4 Global Configuration Mode commands
Command Description