Filter
Top Products
200 Chapter 3 Bulk Load Command
311645-A Rev 00
MASK: [Remote Accessible Net Subnet mask - Required for
Static Routing]
REM_NET_COST: [Remote network cost - Default:10]
REM_NET_STATE: [Remote network state - {Enable/Disable}
Default: Enable]
// Dynamic Routing
OSPF_STATE: [OSPF state {Enable/Disable} (Dynamic Routing)
Default:Disable]
AREA_ID: [Area ID (Dynamic Routing) - Default:0.0.0.0]
OSPF_COST: [OSPF cost (Dynamic Routing) - Default:10]
RIP_STATE: [Rip state {Enable/Disable} (Dynamic Routing) -
Default: Disable]
// IPSec Authentication
IPSEC_PSW: [
IPSec password - Required if not using
certificates
]
IPSEC_SUBJECTDN: [
Subject distinguished name - Required if
using certificates and not IPSEC_ALTNAME
]
IPSEC_ALTNAME: [
Subject alternative name - Required if using
certificates and not IPSEC_SUBJECTDN
]
IPSEC_TYPE: [
Subject name type {Email/DNS/IP} - Required with
certificates and IPSEC_ALTNAME
]
IPSEC_ISSUERCA: [
Issuer certificate authority - Required with
certificates
]
SERVER_CERT:
[Server Certificate - Required with certificates
]
SERVER_ALTNAME: [Server Certificate Alternate name]
// PPTP/L2TP Authentication
TUNNEL_AUTH: [MSChap V2 Authentication {RC4-128,RC4-40,
Unencrypt} - (PPTP & L2TP tunnel types)]