Filter
Top Products
Chapter 1 Introduction 37
Reference for the Contivity VPN Switch Command Line Interface
Privileged Exec Mode
This command mode is entered from User Exec mode with the enable command.
The administrator can exit from this mode with the disable command, they will be
returned to User Exec mode.
This is a full display and configuration mode; it enables additional commands to
those in User Exec mode. Exec commands are typically one-time commands, for
example, show commands and clear commands.
Privileged Exec Mode prompt
CES#
Privileged Exec Mode commands
The following table summarizes the Privileged Exec Mode commands
Table 3 Privileged Exec Mode commands
Command Description
clear arp-cache Clear ARP cache
clear logging events Clear event log
configure Enter configuration mode
disable Turn off privileged commands
help Display message about using help
kill Terminate a Telnet session
more Display the contents of a named file
reload Reboot switch immediately
reload at Schedule a switch reboot
reload cancel Cancel pending reboot
reload in Schedule a switch reboot
reload no-sessions Schedule switch reboot when no
more sessions
show arp Show ARP cache contents
show health Show overall system health
show logging config Show configuration log contents