Filter
Top Products
126 NT8D72 and QPC720 PRI card installation
8
Plug one of the two connectors at the other end of the C11 or C21
connector that was removed.
9
Plug the remaining connector of the QCAD172A power cable into
the added QUD15.
10
Adjust the QCAD111 power wiring harness, untie and then connect:
•
the C17 power connection cable to the right rear Network shelf
•
the C19 power connection cable to the left rear Network shelf
11
Install PRI trunks and enter related shelf and PRI office data into
switch memory.
—End—
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.