Filter
Top Products
95
MSDL installation for all systems
Contents
The section contains information on the following topics:
"Install the MSDL" (page 95)
"Replace the MSDL" (page 98)
Install the MSDL
Installation procedures for the MSDL card are the same for Large Systems.
Use Procedure 9 "Install the MSDL card" (page 95) below. See Figure 40
"MSDL card layout" (page 97), and Table 28 "MSDL switch settings" (page
97) for the port and interface switch settings.
The MSDL card goes into the following slots:
Half Group,
Single Group
CPU/Network Module slot 1–8, 13
Multi Group Network Module slot 5–14
Refer to Software Input Output Reference — System Messages
(NN43001-712) and Circuit Card Reference (NN43001-311) for more
information.
Procedure 9
Install the MSDL card
Step Action
1
Determine module and slot location for the MSDL card. Unpack and
inspect the MSDL card.
2
Set the MSDL switch settings to correspond to Table 28 "MSDL
switch settings" (page 97), and Figure 40 "MSDL card layout" (page
97).
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.