Configuring and managing ports and VLANs 129
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying VLAN information
To display VLAN configuration information, use the following command:
show vlan config [vlan-id]
To display information for VLAN burgundy, type the following command:
WSS# show vlan config burgundy
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)
VLAN
Name
Admin VLAN
Status
Tunl State Affin Port Port Tag State
2 burgundy Up Up 5
2 none Up
3 none Up
4 none Up
6 none Up
Note. The display can include AP access ports and wired authentication ports, because
WSS Software dynamically adds these ports to a VLAN when handling user traffic for the
VLAN.