340 Configuring APs
NN47250-500 (Version 03.01)
Resetting a radio to its factory default settings
To disable an AP radio and reset it to its factory default settings, use the following command:
clear {ap port-list | ap ap-num} radio {1 | 2 | all}
This command performs the following actions:
• Sets the transmit power, channel, and external antenna type to their default values.
• Removes the radio from its radio profile and places the radio in the default radio profile.
This command does not affect the PoE setting.
To disable and reset radio 2 on the AP connected to port 3, type the following command:
WSS# clear ap 3 radio 2